System H - Factory Swaged DIY Balustrade Wires for Timber Posts

System H - Factory Swaged DIY Balustrade Wires for Timber Posts

The Timber Insert with Swaged Stud Slimline Balustrade System is an elegant looking stainless steel balustrade with the tensioning mechanism inside the anchor posts.

Enter the total number of System H wires required and add to cart.  By using Quickshop, you can add the things you need without leaving this page.

Calculate the total length in whole metres of wire rope required (number of wires per run x total length of all runs).

If you have stairs runs, add 1 x SWCP LHT and 1 x SWCP RHT for each wire in each stair run.

Add any other accessories you need (eg driver tool).

You'll need to send us a separate email with your required run lengths, for example:

3250 x 11, 4146 x 11, 2545 x 10 + SWCP - which means:

11 wires @ 3250mm, 11 wires @ 4146mm, and 10 wires for stairs @ 2545mm including swivel connectors.

Note all measurements should be inside post to inside post, with stairs measured the same way but parallel to the handrail.

Installation Instructions

Balustrade System H - Countersunk Timber Insert with Swage Terminal Stud.

Balustrade System H - Countersunk Timber Insert with Swage Terminal Stud.

$15.40

The Timber Insert with Swaged Stud Slimline Balustrade System is an elegant looking stainless steel balustrade with the tensioning mechanism inside...

View full details
$15.40
3.2mm S316 Stainless Rope 1 x 19 Construction - cut length per metre

3.2mm S316 Stainless Rope 1 x 19 Construction - cut length per metre

$1.44

AISI 316 (marine grade) stainless steel premium quality wire rope. Made with diamond coated dies and heat annealed, this stainless steel cable is e...

View full details
$1.44
S316 Swivel Connector, Pin Type, M6 LH Male and Female Threads

S316 Swivel Connector, Pin Type, M6 LH Male and Female Threads

$7.20

Patented AISI316 polished stainless swivel connectors create a slimline stainless wire balustrade for railings and stairs where the wire is incline...

View full details
$7.20
S316 Swivel Connector, Pin Type, M6 RH Male and Female Threads

S316 Swivel Connector, Pin Type, M6 RH Male and Female Threads

$7.20

Patented AISI316 polished stainless swivel connectors create a slimline stainless wire balustrade for railings and stairs where the wire is incline...

View full details
$7.20
System H Driver

System H Driver

$4.32

Used to drive Countersunk Timber Inserts (CSTI) into timber posts with a battery powered driver.

$4.32
Nylon Grommet Split Type, Black, 9mm O.D. x 10mm long, suits wire rope 3.2-5.0mm

Nylon Grommet Split Type, Black, 9mm O.D. x 10mm long, suits wire rope 3.2-5.0mm

$0.54

Used for protecting aluminium or steel posts against chafing or electrolysis with stainless balustrade wire. Black grommets enhance the appearance ...

View full details
$0.54
35° Angled Nylon Grommet for stairs. Two Piece, Black

35° Angled Nylon Grommet for stairs. Two Piece, Black

$1.20

Used for protecting aluminium or steel posts against chafing or electrolysis with stainless balustrade wire. Installation for angled grommets requi...

View full details
$1.20

You recently viewed

Clear recently viewed